T&M Pt100 vs Pt1000 RTDs: Key Differences Explained
Explore the differences between Pt100 and Pt1000 RTDs, including resistance at 0°C and 100°C, and sensitivity.
Measurements
Showing 20 posts (Page 3 of 4)
Advertisement
Radar Measurement Types and Basics
This article explores the various measurements performed on radar systems, including range, PRI, PRF, duty cycle, pulse width, power, antenna gain, EIRP, and more.
RF Circulator Testing: A Guide to Test and Measurement
This article provides a guide to testing RF circulators, covering key parameters, typical test setups, and specifications.
RF Coupler Testing: Specifications and Measurements
A guide to RF coupler testing, covering key parameters like coupling, directivity, insertion loss, and test setups. Learn how to measure these specifications.
RF Isolator Testing: A Comprehensive Guide
Learn about RF isolator testing, key parameters like isolation, insertion loss, VSWR, and the typical test setup.
RF Mixer Testing: Parameters and Setup
This article covers the key test parameters for RF mixers, including conversion loss, noise figure, isolation, and dynamic range. It also describes the test setup.
RF Power Meter vs. Power Analyzer: A Detailed Comparison
A comparison of RF Power Meters and Power Analyzers, highlighting their differences in measurement focus, applications, and capabilities.
RF Testing: Equipment, Skills, and Essential Measurements
Explore the crucial aspects of RF testing, including equipment, required skills, and key measurements for ensuring RF system performance and reliability.
Rotameter: Advantages and Disadvantages
Explore the benefits and limitations of rotameters, a type of variable area flowmeter used for measuring fluid flow rates.
RTD vs Thermocouple: A Detailed Comparison of Temperature Sensors
Explore the differences between RTDs and thermocouples, including accuracy, temperature range, and response time.
SISO vs. MIMO Testing: A Basic Overview
This article compares SISO and MIMO testing, covering setups, common RF compliance tests for transmitters and receivers, and key differences.
Static Error vs. Dynamic Error: Understanding Measurement Errors
Explore the difference between static and dynamic measurement errors, their definitions, and how they impact measurement accuracy.
Swirl Flowmeter vs. Vortex Flowmeter: Key Differences
This article compares swirl and vortex flowmeters, highlighting their operating principles, accuracy, and suitability for different applications.
Swirl Flowmeter: Advantages and Disadvantages
Explore the benefits and drawbacks of swirl flowmeters, detailing their operating principle, accuracy, and limitations in measuring liquids, gases, and steam.
Thermal Mass Flowmeters: Advantages and Disadvantages
This article explores the benefits and drawbacks of thermal mass flowmeters, detailing their operating principle and key features.
Time Domain vs. Frequency Domain Measurements
Explore the differences between time and frequency domain signal analysis, the parameters measured, and instruments used in each method.
Turbine Flowmeter: Advantages and Disadvantages
Explore the working principle, benefits, and drawbacks of turbine flowmeters used for fluid flow rate measurement.
Understanding A, C, and Z Weighting in Sound Level Meters
Explore the differences between A, C, and Z weighting in sound level meters and their importance in accurately measuring sound levels.
Understanding Measurement Errors in Electronic Counters
Explore common error sources in electronic counters, including +/-1 count, time base, trigger, and systematic errors. Learn to differentiate them.
Understanding S-Parameters: S11, S22, S12, and S21
An overview of S-parameters, including S11, S22, S12, and S21. Learn about their definitions, measurement setup, and what they reveal about a device under test.
Advertisement