Static Error vs Dynamic Error | Difference between Static Error and Dynamic Error
This page compares Static Error vs Dynamic Error and mentions difference between Static Error and Dynamic Error.
What is Error in measurement?
An error is defined as difference between the measured value and its actual value. For example, two operators can take different measurement of the same parameter under measurement with the same instrument. The difference in both the measurement is called error.
➨Error = Measured value - True value
➨Error = -Accuracy
• It is defined as difference between the measured value of the quantity and its true value.
• It can be expressed mathematically as follows.
➨ Static Error (δA) = Am - At
Am = Measured value of quantity or actual value
At = True value of quantity or nominal value
It is the difference between true value of quantity changing with time and the value indicated by measurement system if no static error is assumed.
What is difference between or comparison between
Following links mention difference or comparison between various equipments and terms:
comparison between SPI and I2C
difference between PXI and PCI
Microscope vs Telescope
Amplitude Modulation vs Angle Modulation
difference between modem and router
Air Fuel Ratio Sensor vs O2 Sensor
Radiometer vs Spectrometer vs Spectroradiometer
Clamp meter vs digital multimeter
Colorimeter vs Spectrophotometer
difference between Prism and Grating
difference between Venturi meter and Orifice meter
difference between Lux and Lumens